Installation
The Panasonic Heat Pump must be installed by a professional installer holding a valid refrigerant handling certificate and that follows the installation instructions supplied with the unit.
The Panasonic Heat Pump consists of an outdoor unit and an indoor unit. The indoor unit should be placed in an open area giving the unit the ability to circulate the air around the house. It should be placed at about 10 feet above the floor, and at least 4" below the ceiling.
The indoor unit is placed on a mounting plate at the chosen location. One small hole - diameter 2" - needs to be drilled through the wall, to give the isolated copper pipes and the elecrical cable the ability to be connected to the outdoor unit.
The outdoor unit will be mounted on the outside wall. The distance between the indoor unit and the outdoor unit should not be more then 50 ft.
Then the two units will be connected by the electricity cable and two insulated high pressure copper tubes that carry the heating media.